BOSCH - ACCESSORY PACKAGES FOR THE ALLEGİANT

Environmental ;
Note: Specifications for electronic hardware products are noted below unless otherwise specified in applicable accessory section.
Temperature ;
Operating: 4°C to 50°C (40°F to 122°F)
Humidity: 0% to 95% relative, non-condensing
Shock: 50 g, 11 ms, ½ sine
Altitude: 3000 m (10,000 ft)
Model Number: Top Bezel Graphics , Communication Protocol
LTC 8555/00: English , RS-485
LTC 8555/01: Icons , RS-485
LTC 8555/02: English , RS-232
LTC 8555/03: Icons , RS-232
Operating Voltage: 12 VAC (supplied by main Allegiant CPU bay or optional Keyboard Extension Kit)
Signal: 2 wire RS-485, 9600 baud (LTC 8555/00 and LTC 8555/01 models) 3 wire RS-232, 9600 baud (LTC 8555/02 and LTC 8555/03 models)
Connectors: One (1), 6-contact connector for data/power
Construction/Finish: High impact plastic case with charcoal color
Dimensions(W x D x H): 220 x 51 x 155 mm (8.67 x 2.00 x 6.11 in.)
Weight: 0.55 kg (1.22 lb)
Model No.: Rated Voltage1 , Voltage Range , Power
LTC 8557/60: 120 VAC, 50/60 Hz , 108 to 132 , 10 W
LTC 8557/50: 230 VAC, 50/60 Hz , 198 to 264 , 15 W

1. Input voltage of included power supply.

Indicators: Junction box mounted power LED
Connectors: One (1), 4-position screw terminal block. One (1), 6-contact keyboard cable connector.
Construction/Finish: Surface mountable, flat black painted metal enclosure
Dimensions(W x D x H): 121 x 70 x 35 mm (4.75 x 2.75 x 1.375 in.)
Weight: 170 g (6 oz.)
Operating Voltage: 12 VAC (supplied by main CPU bay)
Power: 3 W
Indicators ;
Power: LED
Code: LED
Connectors ;
Input: One (1), 9-pin Sub D connector for data/power
Outputs: Sixteen, 6-contact removable screw terminal blocks for code output. Maximum transmission distance is 1.5 km (5000 ft) using 1 mm2 (18 AWG) shielded-twisted pair (Belden 8760 or equivalent).
Construction/Finish: Charcoal colored metal enclosure
Dimensions(W x D x H): 445 x 318 x 89 mm (17.5 x 12.5 x 3.5 in.) Integral mounting flanges for EIA 48 cm (19 in.) rack
Weight: 1.8 kg (4 lb)
Operating Voltage: 12 VAC or 12 VDC (12 VAC is supplied by main CPU bay)
Power: 8 W
Indicators ;
Power: LED
Alarm: LED; audible tone
Connectors ;
Alarm Inputs: Sixty-four (64); twenty 6-contact removable screw terminal blocks
Alarm Outputs: Eight (8) relay outputs (100 VDC, 0.5 A, 10 W); four (4), 6-contact removable screw terminal block.
Data/Power: One 9-pin Sub D connector
Construction/Finish: Charcoal colored metal enclosure
Dimensions(W x D x H): 445 x 318 x 89 mm (17.5 x 12.5 x 3.5 in.) Integral mounting flanges for EIA 48 cm (19 in.) rack
Weight: 1.8 kg (4 lb)
Model: Features , Input Voltage , P/T Output Voltage
LTC 8560/60: Basic , 120 VAC , 120 VAC
LTC 8560/50: Basic , 230 VAC , 230 VAC
LTC 8561/60: Full , 120 VAC , 120 VAC
LTC 8561/50: Full , 230 VAC , 230 VAC
LTC 8562/60: Basic , 120 VAC , 24 VAC
LTC 8562/50: Basic , 230 VAC , 24 VAC
LTC 8563/20: Basic , 24 VAC , 24 VAC
LTC 8564/20: Full , 24 VAC , 24 VAC
LTC 8566/60: Full , 120 VAC , 24 VAC
LTC 8566/50: Full , 230 VAC , 24 VAC

Refer to the LTC 8560 Series and/or LTC 8561 Series datasheets for complete specifications.

Model No.: Rated Voltage , Voltage Range , Power

LTC 8569/60, LTC 8570/60, LTC 8571/60, LTC 8572/60: 120 VAC, 50/60 Hz , 108 to 132 , 12 W

LTC 8569/50, LTC 8570/50, LTC 8571/50, LTC 8572/50: 230 VAC, 50/60 Hz , 198 to 264 , 12 W

Indicators ;
Power: LED
Code: LED
Connectors ;
Inputs: Two (2), 9-pin Sub D connectors (four (4) with LTC 8570 Series and LTC 8572 Series)
Outputs: Sixteen (32 on LTC 8571 and LTC 8572 Series): 6-contact removable screw terminal blocks for code output. Maximum transmission distance is 1.5 km (5000 ft.) using 1 mm2 (18 AWG) shielded-twisted pair (Belden 8760 or equivalent).
AC Input: 3-wire power cord with grounded plug; 1.8 m (6 ft) long
Construction/Finish: Charcoal colored metal enclosure
Dimensions(W x D x H): 445 x 318 x 89 mm (17.5 x 12.5 x 3.5 in.) Integral mounting flanges for EIA 48 cm (19 in.) rack
Weight: 5.3 kg (11.7 lb)
Model No.: Rated Voltage , Voltage Range , Power
LTC 8770/50: 230 VAC, 50/60 Hz , 198 to 264 , 8 W
LTC 8770/60: 230 VAC, 50/60 Hz , 105 to 132 , 8 W
Indicators: Power and data transmission activity displayed using LEDs. Device number or logical relay number indicated by a 4-position thumbwheel switch located on the rear panel.
Connectors ;
Inputs: One (1), 3-pin removable screw terminal connector, located on the rear panel; communication port where Bi-Phase commands are received
Outputs: Four (4), 12-pin removable screw terminal connectors located on the rear panel; relay contact (0.5 A at 20 VAC/DC and a maximum resistive load of 10 VA) 36 peak volts from either pin of the relay to ground
AC Input: 3-wire power cord with grounded plug; 1.8 m (6 ft) long
Construction/Finish: Steel chassis with sheet metal cover and plastic bezel. Charcoal colored case.
Dimensions(W x D x H): 223 x 280 x 40 mm (8.77 x 11 x 1.59 in.)
Weight: 1.9 kg (4.3 lb)
Optional Rack Mount Kit: LTC 9101/00 (Holds 1 or 2 units)
Model No.: Rated Voltage , Voltage Range , Power
LTC 8712/60: 120 VAC, 50/60 Hz , 108 to 132 , 10 W
LTC 8712/50: 230 VAC, 50/60 Hz , 198 to 264 , 10 W
Indicators: Power and data transmission activity displayed using LEDs
Connectors ;
Inputs: One (1), 9-pin Sub D connector; provides RS-232 interface to Allegiant bay. Two-meter (6-ft) interconnect cable to main bay supplied
Outputs: Four (4), 9-pin Sub D connectors for RS-232 interface to up to four external devices
AC Input: 3-wire power cord with grounded plug; 1.8 m (6 ft) long
Construction/Finish: Steel chassis with sheet metal cover and plastic bezel. Charcoal colored case.
Dimensions(W x D x H): 223 x 280 x 40 mm (8.77 x 11 x 1.59 in.)
Weight: 1.9 kg (4.3 lb)
Optional Rack Mount Kit: LTC 9101/00 (Holds 1 or 2 units)
Allegiant Model No.: Maximum No. of Alarms , Maximum No. of LTC 8713 , Maximum No. of LTC 8540/00
LTC 8500: 128 , 1 , 2
LTC 8600: 512 , 3 , 8
LTC 8800: 1024 , 5 , 16
LTC 8900: 1024 , 5 , 16
Model No.: Rated Voltage , Voltage Range , Power
LTC 8713/60: 120 VAC, 50/60 Hz , 108 to 132 , 10 W
LTC 8713/50: 230 VAC, 50/60 Hz , 198 to 264 , 10 W
Indicators: Power and data transmission activity displayed using LEDs.
Connectors ;
Inputs: One (1), 9-pin Sub D connector; provides RS-232 interface to main Allegiant bay. Two-meter (6-ft) interconnect cable to main bay supplied.
Outputs: Four (4), non-powered, 9-pin Sub D connectors for RS‑232 interface to up to four expanded LTC 8540/00 units. Data cables supplied with LTC 8540/00 are used to connect alarm interfaces to port expander. A separate 12 VAC or DC, 8 W power supply is required for each LTC 8540/00.
AC Input: 3-wire power cord with grounded plug; 1.8 m (6 ft) long
Construction/Finish: Steel chassis with sheet metal cover and plastic bezel. Charcoal colored case.
Dimensions(W x D x H): 223 x 280 x 40 mm (8.77 x 11 x 1.59 in.)
Weight: 1.9 kg (4.3 lb)
Optional Rack Mount Kit: LTC 9101/00 (Holds 1 or 2 units)
Allegiant Model No.: Maximum No. of Keyboards , Maximum No. of LTC 8714 , Maximum No. of LTC 8715
LTC 8600: 16 , 1 , 0
LTC 8800: 32 , 3 , 1
LTC 8900: 64 , 7 , 3
Model No.: Rated Voltage , Voltage Range , Power
LTC 8714/60: 120 VAC, 50/60 Hz , 108 to 132 , 10 W
LTC 8715/60: 120 VAC, 50/60 Hz , 108 to 132 , 10 W
LTC 8714/50: 230 VAC, 50/60 Hz , 198 to 264 , 10 W
LTC 8715/50: 230 VAC, 50/60 Hz , 198 to 264 , 10 W
Indicators: Power and data transmission activity displayed using LEDs
Construction/Finish: Steel chassis with sheet metal cover and plastic bezel. Charcoal colored case.
Dimensions(W x D x H): 223 x 280 x 40 mm (8.77 x 11 x 1.59 in.)
Weight: 1.9 kg (4.3 lb)
Optional Rack Mount Kit: LTC 9101/00 (Holds 1 or 2 units)
Model No.: Rated Voltage , Voltage Range , Power
LTC 8785/60: 120 VAC, 50/60 Hz , 108 to 132 , 12 W
LTC 8785/50: 230 VAC, 50/60 Hz , 198 to 265 , 12 W
Indicators ;
Power: LED
Code: LED
Connectors ;
Inputs: One (1), 9-pin Sub D connector
Outputs: Sixteen (16), 6-contact removable screw terminal blocks for code output. Maximum transmission distance is 1.5 km (5000 ft) using 1 mm2 (18 AWG) shielded twisted pair (Belden 8760 or equivalent).
AC Input: 3-wire power cord with grounded plug; 1.8 m (6 ft) long
Construction/Finish: Charcoal colored metal enclosure
Dimensions(W x D x H): 445 x 318 x 89 mm (17.5 x 12.5 x 3.5 in.) Integral mounting flanges for EIA 22.86 cm (9 in.) rack
Weight: 5.3 kg (11.7 lb)
Construction/Finish: Charcoal painted metal
Size: One standard EIA 48 cm (19 in.) rack unit high and one unit wide. Integral mounting flange design.
Weight: 0.8 kg (1.8 lb)
Model Number: Length
LTC 8809/00: 2 m (6 ft)
LTC 8809/01: 1 m (3 ft)
LTC 8809/02: 3.2 m (10.5 ft)

BOSCH - ACCESSORY PACKAGES FOR THE ALLEGİANT

Teknik Özellikler 1

2

3

4