- True day/night camera with 30x optical zoom
- 720 TVL resolution
- Wide Dynamic Range (WDR)
- Compact, vandal-resistant (IK10 rated) enclosure
- Suitable for indoor and outdoor use
BOSCH - AUTODOME 4000
Imager: 1/4" Double Scan Super HAD CCD II
Lens size: fW=3.49 ±0.17 mm fT=104.02 ±5.20 mm (30x +/- 10% Optical Zoom)
Effective Pixels: PAL: 976 (H) x 582 (V) NTSC: 976 (H) x 494 (V)
Horizontal Resolution: 720 TVL (NTSC, PAL)
Optical Zoom: 30x Effective Optical Zoom
Digital Zoom: 10x
Field of View (approximate): 2.46° (TELE) to 69.5° (Wide)
Focus: Automatic with manual override
Signal-to-Noise Ratio (SNR): >50 dB
White Balance: Auto, indoor, outdoor, one push
Minimum Illumination: 0.2 Lux/ F1.650.001 Lux/DSS0.1 Lux/ICR
Iris Control: Auto
Wide Dynamic Range (WDR): On/Off
Dynamic Noise Reduction (DNR): 3DNR
Privacy: 15 zones maximum
Weight: 1.5 kg (3.3 lb)
Pan Range: 360° continuous
Tilt Range: 0° to 180° (90° when 3D Privacy Masking is enabled)
Flip: Rotate 180° at bottom of tilt
Auto Scan: 8 Auto Scan modes including vector scan
Pre-position Speed: 360°/s
Preset Positions: 99 (Bosch OSRD);210 (Pelco P/D) positions with camera status
Tours: 8 Tours (Preset, Pattern, Scan)
Patterns: 8 Patterns
On-Screen Display (OSD): Camera ID, Title, Mode, and Angle (multi-language)
Multi-language OSD: English, Chinese, Dutch, French, German, Italian, Russian, Spanish
Power Supply: 24 VAC ± 10%, 50/60 HzBuilt-in power line surge
Power Requirements: 24 VAC adapter, 1 A (2.5 A with heater)
Power Consumption: 24 VAC, 850 mA / 20 W (without heater)24 VAC, 2A / 45 W (with heater)
Alarm Input: 4 normal dry contacts (selectable NC/NO)
Alarm Output: 1 normal relay 5 VDC / 40 mA maximum (selectable NC/NO)
Control: RS-485; baud rate: 2400-38.4 Kbps (default = 9600 bps)
Access Time: 0.75 second maximum preset recall time
Camera Address (ID): Physical - 99
Ingress Protection Rating: IP66
External Mechanical Impact (IK Code or Impact rating): IK10
Operating Temperature: -40 °C to +50 °C (-40 °F to +122 °F)Heater works automatically from -40 °C/°F to +10 °C (+50 °F)
Heater thermostat: On/Off at 0 °C to 10 °C (32 °F to 50 °F)
Installation Humidity: 80% relative humidity (RH)
Storage Temperature: -20 °C to +60 °C (-4 °F to +140 °F)
Camera Setup/Control: RS-485; Bosch Biphase with converter (sold separately)
Communications Protocols: Bosch, Pelco P/D;(Bosch Biphase to RS-485 converter (MIC-BP3), sold separately)
Housing Material: Cast aluminum
Color: White or Charcoal
Size (Diameter x Height): Ø154 x 138 mm (H) (Ø 6.06 x 5.43 in.)
Bubble: Ø112 mm (Ø 4.41 in.) polycarbonate; clear or tinted