Choice of 550 TVL 36x or 28x day/night cameras with 12x digital zoom and wide dynamic range
Progressive scan provides smooth and clear images when viewing details in a moving image
Sodium Vapor White Balance mode restores objects to their original color
AutoTrack II automated motion tracking
Advanced privacy masking
Advanced alarm control with rules engine
UTP transmission standard on all models
Cable compensation extends cabling distances
High-impact, heavy-duty, tamper resistant aluminum housing
High-speed 360-degree continuous pan
Preset tour and AutoPan modes

BOSCH - AUTODOME 600 Series Analog PTZ Camera

Imager: 1/4 in.-type Exview HAD CCD (progressive scan)
Effective Picture Elements: PAL: Approx. 440,000; 752(H) x 582(V) NTSC: Approx. 380,000; 768 (H) x 494 (V)
Lens: 36x Zoom (3.4–122.4 mm) F1.6 to F4.5
Zoom Movement Speed: NTSC , PAL
Optical WIDE / Optical TELE – Focus Tracking ON: 4.0 sec. , 4.0 sec.
Optical WIDE / Optical TELE – Focus Tracking OFF: 2.7 sec. , 2.7 sec.
Optical WIDE / Digital TELE: 6.0 sec. , 6.2 sec.
Digital WIDE / Digital TELE: 2.1 sec. , 2.3 sec.
Focus: Automatic with manual override
Iris: Automatic with manual override
Field of View: 1.7° to 57.8°
Video Output: 1.0 Vp-p, 75 Ohm
Gain Control: Auto/Manual/Max. (–3 dB to 28 dB, 2 dB steps)
Aperture Correction: Horizontal and vertical
Digital Zoom: 12x
Horizontal Resolution: 550 TVL (NTSC, PAL) typical
Synchronization: Line-Lock (–120° to 120° vertical phase adjust) or internal crystal
Sensitivity (typical) 1: 30 IRE , 50 IRE
Day Mode ;
SensUp Off: 0.66 lux , 1.4 lux
SensUp On(NTSC: 1/4s, 15X; PAL 1/3s, 16.7X): 0.04 lux , 0.1 lux
Night Mode ;
SensUp Off: 0.104 lux , 0.209 lux
SensUp On(NTSC: 1/4s, 15X; PAL 1/3s, 16.7X): 0.0052 lux , 0.0103 lux
Electronic Shutter Speed: 1/1 to 1/10,000 sec., 22 steps
Wide Dynamic Range (WDR): 92 dB (50 dB with WDR Off)
Signal-to-Noise Ratio (SNR): >50 dB
White Balance: 2000 K to 10,000 K
1. Unless otherwise stated, test conditions are: F1.6; shutter = NTSC 1/60s, PAL 1/50s; max AGC; no bubble. Clear bubble adds 0.09 f-stop loss (90% light transmission). Tinted bubble adds 0.47 f-stop loss (60% light transmission).
Imager: 1/4 in.-type Exview HAD CCD (progressive scan)
Effective Picture Elements: NTSC: 380,000 PAL: 440,000
Lens: 28x Zoom (3.5–98.0 mm) F1.35 to F3.7
Zoom Movement Speed: NTSC , PAL
Optical WIDE / Optical TELE – Focus Tracking ON: 2.5 sec. , 2.5 sec
Optical WIDE / Optical TELE – Focus Tracking OFF: 1.7 sec. , 1.7 sec.
Optical WIDE / Digital TELE – Focus Tracking ON: 4.5 sec. , 4.9 sec.
Optical WIDE / Digital TELE – Focus Tracking OFF: 1.7 sec. , 1.7 sec.
Digital WIDE / Digital TELE: 2.0 sec. , 2.5 sec.
Focus: Automatic with manual override
Iris: Automatic with manual override
Field of View: 2.1° to 55.8°
Video Output: 1.0 Vp-p, 75 Ohm
Gain Control: Auto/Manual/Max. (–3 dB to 28 dB, 2 dB steps)
Aperture Correction: Horizontal and vertical
Digital Zoom: 12x
Horizontal Resolution: 550 TVL
Synchronization: Line-Lock (–120° to 120° vertical phase adjust) or internal crystal
Sensitivity (typical) 2: 30 IRE , 50 IRE
Day Mode ;
SensUp Off: 0.33 lux , 0.66 lux
SensUp On(NTSC: 1/4s, 15X; PAL 1/3s, 16.7X): 0.02 lux , 0.04 lux
Night Mode ;
SensUp Off: 0.066 lux , 0.166 lux
SensUp On(NTSC: 1/4s, 15X; PAL 1/3s, 16.7X): 0.0026 lux , 0.0082 lux
Electronic Shutter Speed: 1/1 to 1/10,000 sec., 22 steps
Wide Dynamic Range (WDR): 92 dB (50 dB with WDR Off)
Signal-to-Noise Ratio (SNR): >50 dB
White Balance: 2000 K to 10,000 K
2. Unless otherwise stated, test conditions are: F1.6; shutter = NTSC 1/60s, PAL 1/50s; max AGC; no bubble. Clear bubble adds 0.09 f-stop loss (90% light transmission). Tinted bubble adds 0.47 f-stop loss (60% light transmission).
In-Ceiling: Indoor Pendant , Outdoor Pendant
Pan Range: 360° cont. , 360° cont. , 360° cont.
Tilt Angle: 1° above horizon , 18° above horizon , 18° above horizon
Variable Speed: 0.1°/s-120°/s , 0.1°/s-120°/s , 0.1°/s-120°/s
Pre-position Speed: Pan: 360°/s Tilt: 100°/s , Pan: 360°/s Tilt: 100°/s , Pan: 360°/s Tilt: 100°/s
Preset Accuracy: ± 0.1° typ. , ± 0.1° typ. , ± 0.1° typ.
In-Ceiling: Indoor Pendant , Outdoor Pendant
Input Voltage: 21-30 VAC 50/60 Hz , 21-30 VAC 50/60 Hz , 21-30 VAC 50/60 Hz
Power Consumption(typical): 15 W / 27 VA , 15 W / 27 VA , 51 W / 55 VA3
3. Add 16 W if using VG4-SHTR-XT kit.
Protection on Video: Peak current 10 kA (Gas Tube Arrester)
Protection on Biphase: Peak current 10 A, peak power 300 W (8/20 μs)
Protection on RS-232/485: ESD protection ±15 KV human body model
Protection on Alarm Inputs: Peak current 17 A, peak power 300 W (8/20 μs)
Protection on Alarm Outputs: Peak current 2 A, peak power 300 W (8/20 μs)
Protection on Relay Outputs: Peak current 7.3 A, peak power 600 W (10/1000 μs)
Protection on Power Input (Dome): Peak current 7.3 A, peak power 600 W (10/1000 μs)
Protection on PowerOutput (Arm Power Supply): Peak current 21.4 A, peak power 1500 W(10/1000 μs)
VGA-FIBER-AN ;
Description: Multimode Fiber Optic Module
Compatible Receiver: LTC 4629 Series
Optical Fiber Compatibility: 50/125 µm, 62.5/125 µm, low loss multimode glass fiber, rated for a minimum system bandwidth of 20 MHz
Max. Distance: 4.0 km (2.5 miles)
Optical Budget: 14 dB
Connector: One (1) ST connector
Wavelength (video/data): 850 nm / 1310 nm
Sectors/Titling: 16 independent sectors with 20-character titles/sector
Masking: 24 individually configurable privacy masks
Pre-positions: 99, each with 20-character titles
Camera Setup/Control: Biphase, RS-232, RS-485, Bilinx (coax)
Communications Protocols: Biphase, Bilinx, Pelco P, and Pelco D
Guard Tours: Two (2) types of tours: Recorded tours – two (2), total duration 15 minutes Preset tour – one (1), consisting of up to 99 scenes, consecutively and (1) customized up to 99 scenes
Supported Languages: English, Czech, Dutch, French, German, Italian, Polish, Portuguese, Russian and Spanish
Cable Compensation ;
Max Distance: With Pre-comp OFF , With Pre-comp ON
RG-59/U: 1000 ft (300 m) , 2000 ft (600 m)
RG-6/U: 1500 ft (450 m) , 3000 ft (900 m)
RG-11/U: 2000 ft (600 m) , 4000 ft (1200 m)
Cat 5/UTP (Passive receiver): 750 ft (225 m) , 1500 ft (450 m)
Power, Camera: 21-30 VAC, 50/60 Hz
Power, Heater: 21-30 VAC, 50/60 Hz
Control Data: Biphase ± RS-232 RX/TX or RS-485 ± - optional control data (dip switch selectable)
Video: BNC/UTP
Audio Line In: 9 K Ohm typ, 5.5 Vp-p max
EOLR Alarm Inputs (2): Programmable for “normally open”, “normally closed”, “normally open-supervised”, “normally closed-supervised”
Alarm Inputs (5): Programmable for “normally open” or “normally closed”
Relay Out (1): Dry contact output rating: 2 A @ 30 VAC
Open Collector Outputs (3): 32 VDC@150 ma max.
In-Ceiling: Indoor Pendant , Outdoor Pendant
DesignRating: IP54,4 Plenum rated , IP665 , IP665
Operating Temp. : –10°C to 40°C (14°F to 104°F) , –10°C to 40°C (14°F to 104°F) , –40°C to 50°C (–40°F to 122°F) with XT kit: –60°C to 50°C (–76°F to 122°F)
Storage Temp. : –40°C to 60°C (–40°F to 140°F) , –40°C to 60°C (–40°F to 140°F) , –40°C to 60°C (–40°F to 140°F)
Humidity: 0% to 90% relative, non-condensing , 0% to 90% relative, non-condensing , 0% to 100% relative, condensing
4. With optional VGA-IP54K-IC kit.5. Meets requirements for NEMA 4X certification with use of a polycarbonate bubble. Meets requirements for NEMA 4X, except impact test, with use of an acrylic bubble.
Dimensions: See dimensional drawings
Weight ;
In-ceiling: 2.66 kg (5.86 lb)
Indoor Pendant: 2.88 kg (6.3 lb)
Outdoor Pendant: 3.32 kg (7.3 lb)
Bubble Size: 153.1 mm diameter (6.03 in.)
Construction Material ;
Housing: Cast aluminum
Bubble: Pendant: Acrylic (high-resolution) In-ceiling: Polycarbonate (rugged)
Color: White (RAL 9003)
Standard Finish: Powder coated, sand finish
Bubbles ;
In-ceiling ;
Clear rugged polycarbonate: VGA-BUBBLE-CCLR
Tinted rugged polycarbonate: VGA-BUBBLE-CTIR
Pendant ;
Clear rugged polycarbonate: VGA-BUBBLE-PCLR
Tinted rugged polycarbonate: VGA-BUBBLE-PTIR
Clear high-resolution acrylic: VGA-BUBBLE-PCLA
Tinted high-resolution acrylic: VGA-BUBBLE-PTIA
Pendant Arm Mounts ;
Wall Arm (No Transformer): VG4-A-PA0
Wall Arm (120/230 VAC Transformer): VG4-A-PA1 / VG4-A-PA2
Pendant Arm with Wiring: VGA-PEND-ARM
Mounting plate for: VGA-PEND-ARM: VGA-PEND-WPLATE
Trim skirt for AUTODOME Series Power Supplies: VG4-A-TSKIRT
Optional Mounting Plates for Arm Mounts ;
Corner Mounting Plate: VG4-A-9542
Mast (Pole) Mounting Plate: VG4-A-9541
Pendant Pipe Mounts ;
Pipe Mount Cap: VG4-A-9543
Pendant Roof Mounts ;
Roof (Parapet) Mount(VG4-A-9543 Pipe Mount Cap required. Available separately.): VGA-ROOF-MOUNT(1.5-inch NPT tapered male threads)
Optional Mounting: Plates for Roof Mounts
Flat Roof Adapter for Parapet Mount: LTC 9230/01
In-ceiling Support Kits ;
Bracket for suspended or drop ceilings: VGA-IC-SP
Gasket kit for IP54 certification: VGA-IP54K-IC
Power Supplies ;
Outdoor Power Supply Box, no transformer: VG4-A-PSU0
Outdoor Power Supply Box (120/230 VAC Transformer): VG4-A-PSU1 / VG4-A-PSU2
Extended temp heater moduleextends temperature range to – 60°C (–76°F) for outdoor pendants only: VG4-SHTR-XT
Fiber Optic Kit: VGA-FIBER-AN
Reference: Description
1: Wall Mount – Side with power supply
1a: Wall/Mast Mount – Side with VGA-PEND-WPLATE
2: Wall Mount – Front with power supply and trim skirt
2a: Wall Mount – Front with power supply
3: Wall Mount – Back with power supply and trim skirt
3a: Wall Mount – Back with power supply
4: Pipe Mount
5: In-ceiling Mount – Front
6: In-ceiling Mount – Side
Reference: Description
1: Wall Mount – Side with power supply and trim skirt
1a: Wall/Mast Mount – Side with VGA-PEND-WPLATE
2: Wall Mount – Front with power supply and trim skirt
2a: Wall Mount – Front with power supply
3: Wall Mount – Back with power supply and trim skirt
3a: Wall Mount – Back with power supply
4: Pipe Mount
5: Mast Mount
6: Corner Mount
7: Roof Mount
8: Roof Mount Adapter
9: Power Supply for Pipe and Roof Mounts

BOSCH - AUTODOME 600 Series Analog PTZ Camera

Teknik Özellikler 1

2

3

4