top of page
  • Excellent low-light performance
  • High Dynamic Range (120 dB) for challenging bright and dark scenes
  • Built-in Intelligent Video Analytics to trigger relevant alerts and quickly retrieve data
  • Enhanced camera reliability with optional dual, redundant power ensures continuous 24x7 operation
  • Dedicated AES 256-bit crypto engine for secure recorded video

BOSCH - AUTODOME IP starlight 7000 HD (1080p)

  • Imager: 1/2.8-type Exmor R CMOS sensor
    Effective Picture Elements (Pixels): 1945 x 1097 (2.13 MP)
    Lens: 30x Zoom4.3 mm to 129 mmF1.6 to F4.7
    Field of View (FOV): 2.3° to 63.7°
    Focus: Automatic with manual override
    Iris: Automatic with manual override
    Digital Zoom: 12x
    Video performance - Sensitivity    
    (3100K, reflectivity 89%, 1/30, F1.6, 30 IRE)    
    Color: 0.0077 lx
    Mono: 0.0008 lx
    Gain control: AGC, Fixed
    Aperture Correction: Horizontal and vertical

    Electronic Shutter Speed (AES): 1/1 sec to 1/10000 sec (22 steps)
    Signal-to-Noise Ratio (SNR): >55 dB
    Backlight compensation (BLC): On, Off
    White balance: 2000 K to 10,000 K ATW, AWB Hold, Extended ATW, Manual, Sodium Lamp Auto, Sodium Lamp
    Day/Night: Monochrome, Color, Auto
    Improves visibility when viewing foggy or other low-contrast scenes.    
    Dynamic range    
    High Dynamic Range (HDR) Mode: 120 dB WDR
    In-Ceiling: Pendant
    Pan Range: 360° cont. , 360° cont.
    Tilt Angle: 1° above horizon , 18° above horizon
    Pre-position Speed: Pan: 400°/sTilt: 300°/s , Pan: 400°/sTilt: 300°/s
    Pan/Tilt Modes     
    Turbo Mode(Manual Control): Pan: 0.1°/s – 400°/sTilt: 0.1°/s – 300°/s

    Normal Mode: 0.1°/s-120°/s , 0.1°/s-120°/s
    Preset Accuracy: ± 0.1° typ. , ± 0.1° typ.
    In-Ceiling: Pendant
    Input Voltage: 21-30 VAC, 50/60 Hz; (class II) High PoE (with Bosch Midspan (NPD-6001A); required to power the heater) PoE+ (IEEE 802.3at, class 4 standard)(when used indoors, not powering the heater)
    Power Consumption,typical: 24 W / 44 VA , 60 W / 69 VA (heaters on)or24 W / 44 VA(heaters off / without heater connected in power supply box for indoor applications)
    Protection on Alarm Inputs: Peak current 17 A, peak power 300 W (8/20 μs)
    Protection on Alarm Outputs: Peak current 2 A, peak power 300 W (8/20 μs)
    Protection on Relay Output: Peak current 7.3 A, peak power 600 W (10/1000 μs)
    Protection on Power Input (Dome): Peak current 7.3 A, peak power 600 W (10/1000 μs)
    Protection on PowerOutput (Arm Power Supply): Peak current 21.4 A, peak power 1500 W (10/1000 μs)
    10/100 EthernetData Lines: Peak current 14 A, peak power 200 W (8/20 μs)
    Camera Setup/Control: Via web browser (such as Internet Explorer version 7.0 or later), Bosch Configuration Manager, Bosch Video Management System (BVMS), Bosch Recording Station (BRS), or Bosch Video Client (BVC)

bottom of page