BOSCH - AUTODOME SERİES MOUNTS AND ACCESSORİES

Dimensions ;
Indoor Pendant Mounts1 (W x H x D) ;
VGA-PEND-ARM: 169.5 x 366.4 x 460.1 mm (6.67 x 14.43 x 18.12 in.)
Outdoor Pendant Mounts1 (W x H x D) ;
VGA-PEND-ARM: 224.0 x 366.4 x 477.6 mm (8.82 x 14.43 x 18.8 in.)
Pendant Mount Accessories ;
VGA-PEND-WPLATE(W x H): 169.5 x 216.4 mm (6.67 x 8.52 in.)
VG4-A-9541(W x H x D): 175.0 x 183.0 x 58.9 mm (6.9 x 7.6 x 2.3 in.)
VG4-A-9542(W x H x D): 219.1 x 236.0 x 216.4 mm (6.83 x 9.3 x 5.25 in.)
VGA-ROOF-MOUNT(W x H): 1,022.4 x 1,190.8 mm (40.25 x 46.88 in.)
LTC 9230/01(W x H): 254.0 x 254.0 mm (10.0 x 10.0 in.)

• 1. Dimensions include the mount and the connected pendant housings.   

Model: Input , Output Rating , Input Fuses , Output Fuses
Camera: Heater
VG4-A-PSU0: 24 VAC, 50/60 Hz , 24 V @ 96 VA , 5.0 A , 2.0 A , 3.15 A
VG4-A-PSU1: 120 VAC, 50/60 Hz , 24 V @ 96 VA , 1.6 A , 2.0 A , 3.15 A
VG4-A-PSU2: 230 VAC, 50/60 Hz , 24 V @ 96 VA , 0.8 A , 2.0 A , 3.15 A
Mechanical ;
Certifications: UL, CE, Plenum Rated
Dimensions (W x H x D),all models2: 170.0 x 216.4 x 105.0 mm (6.69 x 8.52 x 4.13 in.)
Construction Material: Cast Aluminum
Standard Color: White (RAL9003)
Standard Finish: Powder coated, sand finish

• 2. Dimensions for power supplies include the cover.    

Environmental ;
Operating Temperature –60°C to 55°C (–76°F to 131°F)
Humidity: 0% to 100%, condensing
Environmental Protection: IP66, IK 8 (IEC 62262)

VGA-FIBER-AN ;
Description: Multimode Fiber Optic Module
Compatible Receiver: LTC 4629 Series
Optical Fiber Compatibility: 50/125 µm, 62.5/125 µm, low loss multimode glass fiber, rated for a minimum system bandwidth of 20 MHz
Max. Distance: 4.0 km (2.5 miles)
Optical Budget: 14 dB
Connector: One (1) ST connector
Wavelength (video/data): 850 nm / 1310 nm
VG4-SFPSCKT ;
Description: Fiber Optic Ethernet Media Converter kit.Requires a small form-factor pluggable (SFP) module (sold separately).
Data Interface: Ethernet
Data Rate: 10/100 MbpsIEEE 802.3 CompliantFull Duplex or Half Duplex Electrical PortFull Duplex Optical Port
Compatible Receiver: CNFE2MC/IN
Installation: Installed inside a VG4-A-PA1, VG4-A-PA2, VG4-A-PSU1 or a VG4-A-PSU2 power supply box, or in a MIC IP PSU, with supplied mounting hardware. Note: Wiring for the VG4-SFPSCKT must be routed through the proper conduit opening on the power supply box. Refer to the installation guide that accompanies the module.
Operating Temperature: -40 °C to +50 °C(-40 °F to +122 °F)
SFP Modules ;
Description: Interchangeable modules available for use with MMF or SMF optical fiber.
Data Interface: Ethernet
Data Rate: 10/100 Mbps IEEE 802.3 Compliant
Mechanical ;
Dimensions (W x H x D) ;
SFP-2 and SFP-3: 13.5 x 8.5 x 55.5 mm (0.5 x 0.3 x 2.2 in.)
SFP-23, SFP-24, SFP-25, SFP-26: 13.5 x 8.5 x 63.8 mm (0.5 x 0.3 x 2.5 in.)
Weight (all SFP modules): 0.23 kg (.05 lb)
Type: Connector , Wavelength (transmit/receive) , Max. Distance
SFP-2: MMF , Duplex LC , 1310 nm / 1310 nm , 2 km (1.2 miles)
SFP-3: SMF , Duplex LC , 1310 nm / 1310 nm , 20 km(12.4 miles)
SFP-25: MMF , Single SC , 1310 nm / 1550 nm , 2 km(1.2 miles)
SFP-26: MMF , Single SC , 1550 nm / 1310 nm , 2 km(1.2 miles)

Fiber Compatibility ;
Optical Fiber Compatibility, MMF: 50/125 µm MMF. For 50/125 µm fiber, subtract 4 dB from the specified optical budget value. Must meet or exceed fiber standard ITU-T G.651.
Optical Fiber Compatibility, SMF: 8–10/125 µm SMF. Must meet or exceed fiber standard ITU-T G.652.
Optical Distance Specifications: Specified transmission distances are limited to the optical loss of the fiber and any additional loss introduced by connectors, splices, and patch panels. The modules are designed to operate over the entire optical loss budget range, so they do not require a minimum loss in order to operate.
VG4-SHTR-XT: Extended temperature heater module extends temperature range to –60°C (–76°F); for  AUTODOME 600 Series Outdoor Pendants only
Construction material: Nylon
Size: ⌀ 181.80
External Mechanical Impact (IK Code or Impact rating): IK10
UV Rating for Sunlight: F1
Reference: Description
1: Wall Mount – Side with power supply
1a: Wall/Mast Mount – Side with VGA-PEND-WPLATE
2: Wall Mount – Front with power supply and trim skirt
2a: Wall Mount – Front with power supply
3: Wall Mount – Back with power supply and trim skirt
3a: Wall Mount – Back with power supply
4: Pipe Mount
5: In-ceiling Mount – Front
6: In-ceiling Mount – Side
Reference: Description
1: Wall Mount – Side with power supply and trim skirt
1a: Wall/Mast Mount – Side with VGA-PEND-WPLATE
2: Wall Mount – Front with power supply and trim skirt
2a: Wall Mount – Front with power supply
3: Wall Mount – Back with power supply and trim skirt
3a: Wall Mount – Back with power supply
4: Pipe Mount
5: Mast (Pole) Mount Adapter
6: Corner Mount Adapter
7: Roof Mount
8: Roof Mount Adapter
9: Power Supply for Pipe and Roof Mounts