top of page
  • Electropolished 316L stainless steel or aluminum construction
  • High-resolution, high-sensitivity Dinion 2X imager with WDR
  • Integrated junction box
  • ATEX, UL, IECEx, and INMETRO Certifications
  • Sunshield included
  • Easy one-piece installation
  • Optional integrated Fiber Optics

BOSCH - EX65 EXPLOSION PROTECTED CAMERA

  • Rated Voltage: 12–24 VAC, 50/60 Hz 12–24 VDC
    CCD Type: 1/3-in. Interline, WDR dual shutter
    Power Consumption
    Typical ;
    Standard Models (BNC connector)
    : Fiber Optic Models (ST connector)
    12 VDC (Tamb @ 20 °C) (68 °F): 6 W , 7.7 W
    24 VAC (Tamb @ 20 °C) (68 °F): 9.4 W , 11.3 W
    12 VDC (Tamb @ -50 °C)(-58 °F): 10.2 W , 11.3 W
    24 VAC (Tamb @ -50 °C) (-58 °F): 15.7 W , 17.6 W
    Maximum ;
    12 VDC (Tamb @ 20 °C)(68 °F)
    : 8.0 W , 9.5 W
    24 VAC (Tamb @ 20 °C)(68 °F): 11.2 W , 13.4 W
    12 VDC (Tamb @ -50 °C)(-58 °F): 16.0 W , 14.7 W
    24 VAC (Tamb @ -50 °C)(-58 °F): 19.3 W , 22.4 W
    Active Pixels ;
    PAL Model
    : 752 x 582
    NTSC Model: 768 x 494
    Sensitivity (3200 K, scene reflectivity 89%, F1.2)    
    Full video (100 IRE)
    : Usable picture (50 IRE) , Usable picture (30 IRE)
    Color: 2.4 lx (0.223 fc) , 0.47 lx (0.044 fc) , 0.15 lx(0.0139 fc)
    Color + SensUp 10x: 0.24 lx (0.0223 fc) , 0.047 lx (0.00437 fc) , 0.015 lx (0.00139 fc)
    Monochrome: 0.98 lx (0.091 fc) , 0.188 lx (0.0174 fc) , 0.060 lx (0.0056 fc)
    Monochrome + SensUp 10x: 0.098 lx (0.0091 fc) , 0.019 lx (0.00176 fc) , 0.0060 lx (0.000557 fc)
    Horizontal Resolution: 540 TVL
    Signal-to-Noise Ratio: >50 dB
    Video Output: Composite video 1 Vpp, 75 ohm
    Synchronization: Internal, Line Lock, HV-lock and Genlock (Burst lock) selectable
    Shutter: Auto (1/50 [1/60] to 1/10000) selectable Auto (1/50 [1/60] to 1/50000) automatic flickerless, fixed selectable

    Sensitivity Up: Adjustable from Off up to 10x
    Day/Night: Color, Mono, Auto
    Auto Black: Automatic continuous, Off
    Dynamic engine: XF-Dynamic, 2X-Dynamic, SmartBLC
    Dynamic range: 120 dB (20-bit image processing)
    Dynamic Noise Reduction: Auto, On/off selectable
    Sharpness: Sharpness enhancement level selectable
    SmartBLC: On (includes 2X-Dynamic ) / Off
    AGC: AGC On or Off (0–30 dB) selectable
    Peak White Invert: On/Off
    White Balance: ATW, ATWhold and manual (2500 to 10000K)
    Alarm Output: VMD or day/night switch
    Alarm Output Relay: 30 VAC or +40 VDC, Max 0.5 A continuous, 10 VA
    Cable Compensation(coax version only): Up to 1000 m (3000 ft) coax without external amplifiers (automatic set-up in combination with Bilinx coaxial communication)

  • Camera ID: 17-character editable string, position selectable
    Test Pattern Generator: Color bars 100%, Grayscale 11-step, Sawtooth 2H, Checker board, Cross hatch, UV plane
    Modes: Six (6) preset programmable modes
    Remote Control(coax version only): Bilinx coaxial bi-directional communication
    Video Motion Detection: One area, fully programmable
    Privacy Masking: Four (4) independent areas, fully programmable
    Controls: OSD with soft-key operation (multi-lingual)
    Lens: 5–50 mm IR corrected
    Heater: Included
    Optical Connector Type: ST
    Optical Fiber Compatibility: 50/125 µm or 62.5/125 µm, graded index multimode glass fiber rated for a minimum bandwidth of 600 MHz-Km. For 50/125 fiber, subtract 4 dB from the specified optical budget value.
    Optical Distance Specifications: Specified transmission distances are limited to the optical loss of the fiber and any additional loss introduced by connectors, splices, and patch panels. The modules are designed to operate over the entire optical loss budget range, so they do not require a minimum loss in order to operate.
    Number of Fibers: One (1)
    Optical Budget: 14 dB
    Maximum Distance: 4.0 km (2.5 miles)
    Technology Type: AM Video modulation
    Wavelength: 850 nm
    Optical Emitter: LED
    Transmitter Output Power: 25 uW (–16 dBm)
    Video Bandwidth: 5 Hz to 10 MHz
    Differential Gain: < 5%
    Differential Phase: < 5°
    Tilt: < 1%
    Signal-to-Noise Ratio (SNR): > 55 dB @ 10 dB attenuation > 60 dB @ 7 dB attenuation
    Dimensions (L x W x H): 381 x 114 x 114 mm (11.01 x 4.5 x 4.5 in.) without sunhood or mounting cradle
    Weight: Stainless Steel: 12.9 kg (28.5 lb) Aluminum: 6.4 kg (14 lb)
    Construction: Electropolished 316L Stainless Steel or Anodized Aluminum
    Bracket: Pan(±36°)/Tilt(±45°), mounting cradle included
    Cable Entry: Four (4) 3/4-in. NPT entries; conduit seal included with NTSC models; M20 adapter included with PAL models
    View Window: 9-mm thick borosilicate float glass
    Operating Temperature ;
    Aluminum models
    : -50 °C to 60 °C (-58 °F to 140 °F)
    Stainless steel models: -50 °C to 55 °C (-58 °F to 131 °F)
    Storage Temperature: -55 °C to 70 °C (-67 °F to 158 °F)
    Operating Humidity: 0 to 100% relative (condensing, after installed and sealed)
    Storage Humidity: 20 to 98% relative (non-condensing)

bottom of page