LSN ;
LSN input voltage: 15 V DC to 33 V DC (min. to max.)
Max. current consumption from LSN: 1.75 mA
Relay (low voltage): Normally closed, common and normally open contact (NC/COM/NO)
Contact load (ohm resistive load): FLM‑420‑RLV1‑E
Max. switching current and voltage: 1 A / 30 V DC 0.5 A / 42.4 V AC
Min. switching current and voltage: 0.01 mA / 10 mV DC 0.01 mA / 10 mV AC
Max. frequency AC: 100 Hz
Contact load (ohm resistive load): FLM‑420‑RLV1‑D
Max. switching current and voltage: 5 A / 30 V DC 0.5 A / 42.4 V AC
Min. switching current and voltage: 0.1 mA / 100 mV DC 0.1 mA / 100 mV AC
Max. AC frequency: 100 Hz
Minimum activation time of the connected device: > 20 ms
Connections ;
FLM-420-RLV1-E: 12 screw terminals
FLM-420-RLV1-D: 6 threaded terminals
Permitted wire cross-section ;
FLM-420-RLV1-E: 0.6 to 2.0 mm2
FLM-420-RLV1-D: 0.6 to 3.3 mm2
Address setting ;
FLM-420-RLV1-E: 8 DIP switches
FLM-420- RLV1-D: 3 rotary switches
Housing material ;
FLM-420- RLV1-E: ABS/PC blend
FLM-420- RLV1-D with adapter: PPO (Noryl)
Color ;
FLM-420- RLV1-E: Signal white, RAL 9003
FLM-420- RLV1-D: Off-white, similar to RAL 9002
Dimensions ;
FLM-420- RLV1-E: Approx. 50 mm x 22 mm (Ø x H)
FLM-420- RLV1-D with adapter: Approx. 110 x 110 x 48 mm (W x H x D)
Weight: Without / with packaging
FLM-420- RLV1-E: Approx. 35 g / 130 g
FLM-420- RLV1-D: Approx. 150 g / 235 g
Permitted operating temperature: -20 °C to +55 °C
Permitted storage temperature: -25 °C to +80 °C
Permitted rel. humidity: < 96% (non-condensing)
Classes of equipment as per IEC 60950: Class III equipment
Protection class as per IEC 60529: IP 30
