© 2017 by ATLAS Corp.

  • Two interfaces – RS485 and Wiegand.
  • For use with MIFARE classic and EV1 cards and key-fobs.
  • IP65 rated for indoor and outdoor use
  • Wall or mullion mount
  • Tamper switch

BOSCH - LECTUS DUO 3000 EV1 LINE

  • Electrical characteristics ;
    Input voltage
    : 8.5 V to 16 Vdc - max. 18 Vdc
    Current draw: 65 mA @ 12 Vdc Max.: 130 mA @ 12 Vdc
    Operational Characteristics ;
    Tamper output
    : Open collector, active low, 32 mA max sink current. Optical Technology
    Wiegand D0 output: 5 V (TTL)
    Wiegand D1 output: 5 V (TTL)
    Green LED control input: Active low
    Red LED control input: Active low
    Buzzer control input: Active low
    RS485: OSDP protocol
    Wiegand IF: D0/D1 Wiegand protocol
    Keypad: LECTUS duo 3000 E: none LECTUS duo 3000 EK: 2x6
    Environmental Characteristics ;
    Operating environment
    : Indoor and outdoor use - all weather
    Operating temperature: -25 °C to 65 °C (-13 °F to 150 °F)
    Operating humidity: 0 to 95% (Non-condensing)
    IP rating: IP65
    UV-light resistant: Yes
    Vandal resistance: IK08
    MIFARE & Cards Specification ;
    Read range - ISO cards
    : > 3 cm (1.18 in.)
    Key fob: > 2 cm (0.78 in.)
    Supported cards: MIFARE 13.56 MHz ISO 14443 Type A
    Anti-Collision support: Yes
    NXP Chips supported: MF3ICD21 - 2K MF3ICD41 - 4K MF3ICD81 - 8K

    • MIFARE MAD, CSN Support    
    • The reader follows the MAD rules    

    Reads INIT CSN: Yes
    Reads CSN after non-detection of MAD information: Yes
    Physical Characteristics ;
    Dimensions (L x W x D)
    : 137 mm x 44 mm x 27.5 mm (5.39 in. x 1.73 in. x 1.08 in.)
    Weight: Approx. 220 g (0.5 lb)