- Compact, single bay construction with connections for up to 32 cameras and up to 6 monitors
- Integral alarm interface and signal distribution
- Powerful alarm handling features
- SalvoSwitching® and SatelliteSwitch® capability
- PC-based software package available
BOSCH - LTC 8300/90 INTEGRATED SERİES ALLEGİANT MATRİX/CONTROL SYSTEMS
Capacities ;
Video Inputs (Standard): 32
Video Inputs (Looping): 32
Video Inputs (Satellite): 256
Video Outputs: 6
Alarm Inputs: 32
Alarm Outputs: 6
Biphase Outputs: 16
Keyboards: 4
RS-232 Ports (Console): 1
RS-232 Ports (Printer): 1
Receiver/Drivers (Standard): 32
Receiver/Drivers (Satellite): 256
Voltage Range: 108 to 253 VAC, 50/60 Hz
Nominal Power²: 18 W
Connectors ;
Video Inputs and Monitor Outputs: BNC
Looping Video Connections: Two 34-pin ribbon connectors used with the LTC 8808/00 video interconnect panel (not included)
2 Power at rated voltage fully loaded.
Input Voltage Level: 0.5 Vp-p to 2 Vp-p (Composite Negative Sync)
Gain: Unity ± 2% (75 Ohm terminated)
Pulse/Bar Ratio1: 94% to 106%
2T Pulse K Factor1: 2.5% maximum
Bar Amplitude1: 96% to 106%
Field Time Waveform Distortion1: 2% maximum
Line Time Waveform Distortion1: 1% maximum
Short Time Waveform Distortion1: 2% maximum
Video Bandwidth (-3 dB) 2: 22 MHzFrequency Response 2: ± 1.0 dB to 10.5 MHz
Signal-to-Noise1: 60 dB at 3.58 MHz unweighted minimum (Typical at 3.58 MHz)
Crosstalk (Adjacent Channel): -52 dB at 3.58 MHz
Differential Gain1: 2% maximum
Differential Phase1: 1.3° maximum
Chrominance Luminance Gain1: 96% to 104%
Chrominance Nonlinear Phase1: 2° maximum
Luminance Nonlinearity1: 4% maximum
Switching: Cross point matrix
DC Output: 0 V
1 Meets EIA/TIA - 250C Medium Haul Standard. 2 One camera to one monitor.
Operating Temperature: 4°C to 55°C (40°F to 131°F)
Storage Temperature: –40°C to 60°C (–40°F to 140°F)
Altitude: 4500 m (15,000 ft)
Humidity: 0% to 95% relative, non-condensing
CONSOLE: RS-232 port for external PC or control interface (default = 19,200 baud) 9-pin D-type connector
ALARMS: Inputs use removable screw terminal connectors. Relay outputs provide alarm output connections. (Contact rating = 1.5 A at 30 VDC)
PRINTER: RS-232 port for system logging printer (Default = 19,200 baud) 9-pin D-type connector
BIPHASE OUT: Multiple ports provide receiver/driver connections when used in a daisy chain configuration. Removable screw terminal connector blocks.
KEYBOARDS: 6-pin RS-485 ports for Allegiant keyboard use
Construction: Steel chassis with sheet metal cover and plastic bezel
Finish: Charcoal
Dimensions (H x D x H): 440 x 305 x 89 mm (17.3 x 12 x 3.5 in.)
Weight: 4.8 kg (10.7 lb)
Rack Mount (Integral): Brackets for mounting one unit in a 48 cm (19 in.) EIA rack
Two (2) standard rack units high
The Allegiant accessory products provide many optional features to the base Allegiant switching systems. Accessory products include keyboards, keyboard extension kits, Allegiant Bilinx Data Interface unit, receiver/driver units, switcher/followers, and code merger units. All accessory products are designed to be installer-friendly and compatible throughout the Allegiant series systems. See the Allegiant Accessories datasheet.