BOSCH - LTC 8500 SERİES ALLEGİANT MATRİX/CONTROL SYSTEMS - MODULAR

Video Inputs: Standard: 64 Satellite configuration: 256
Video Outputs: 8
Keyboards: 8
Alarm Inputs: 128
Receiver Drivers: Standard: 64 Satellite configuration: 256
Video Bandwidth (-3 dB): 8 MHz typical
Differential Gain: 3% maximum
Differential Phase: 3° maximum
K Factor: 0.5%
Signal-to-Noise-Ratio: 60 dB minimum
Crosstalk (Input Isolation): 70 dB Typical at 3.58 MHz
Feed through (Input to Output Isolation): 50 dB Typical at 3.58 MHz
Gain: Unity (into 75 Ohm termination)
Tilt: 1% Typical
Temperature ;
Operating: 0°C to 50°C (32°F to 122°F)
Storage: –40°C to 60°C (–40°F to 140°F)
Altitude: 3000 m (10,000 ft)
Humidity: 0 to 95% relative, non-condensing
Vibration: 3 g swept sine wave, 15 Hz to 2000 Hz
Shock: 50 g, 11 m/s, 1/2 sine wave
Includes: LTC 8501/00 equipment rack, LTC 8511/00 microprocessor module, and LTC 8505 Series power supply.    
PowerModel No.: Rated Voltage , Voltage Range , Nominal Power1
LTC 8501/60: 120 VAC, 50/60 Hz , 100 to 140 , 192 W
LTC 8501/50: 220-240 VAC, 50/60 Hz , 198 to 264 , 192 W

• 1. Power at rated voltage fully loaded.    

Connectors ;
Video Inputs: 1 to 64, 1 Sync input, and 8 monitor inputs
Outputs: BNC

• 9-pin D-type Connectors    

Console: RS-232 port for external PC or control interface (default = 1200 baud)
Alarm: RS-232 port for Allegiant alarm accessory units (default = 1200 baud)

Printer: RS-232 port for system logging printer (default = 1200 baud)
SDA: TTL level, high-speed control data output (Bi-Phase) for interface to Allegiant series signal distribution units (data clock rate = 31.25 kHz)
Keyboards: Eight 6-pin RS-485 ports for Allegiant keyboard use (default = 9600 baud)
Size(W x D x H): EIA 48 cm (19 in.) rack 483 x 356 x 178 mm (19 x 14 x 7 in.)
Weight: 8.2 kg (18.2 lb)
Construction/Finish ;
Top and Bottom: Steel
Front, Sides, and Back: Aluminum
Finish: Charcoal
Size (D x H): 290 x 160 mm (11.5 x 6.25 in.)
Weight: 0.34 kg (0.8 lb)

• (LTC 8505/60–120 VAC, LTC 8505/50–220-240 VAC)    

Size(W x D x H): 90 x 335 x 160 mm (3.46 x 13.2 x 6.25 in.)
Weight: 4 kg (9 lb)
Indicators: One power On/Off, seven fuse alert, and one external sync LED

• Use up to eight (8) per equipment bay.    

Camera Inputs: 8
Size (D x H): 290 x 160 mm (11.5 x 6.25 in.)
Weight: 0.23 kg (0.5 lb)

• Use up to four (4) per equipment bay.    

Monitor Outputs: 2
Size (D x H): 290 x 160 mm (11.5 x 6.25 in.)
Weight: 0.27 kg (0.6 lb)
Allegiant Accessories ;

• The LTC 8500 Series accessory products provide many optional features to the base Allegiant switching systems. Accessory products include keyboards, keyboard extension kits, receiver/driver units, switcher/followers, and code merger units. All accessory products are designed to be installer-friendly and compatible throughout the Allegiant series systems. Refer to the Allegiant Accessories datasheet for complete details.