BOSCH - LTC 8600 SERİES ALLEGİANT MATRİX/CONTROL SYSTEMS - MODULAR

Capacities ;
Video Inputs: Standard: 128 Satellite configuration: 1024
Video Outputs: 16
Keyboards: 16
Alarm Inputs: 512
Receiver/Drivers: Standard: 128 Satellite configuration: 1024
Video Bandwidth (-3 dB): 12 MHz typical
Differential Gain: 1% maximum
Differential Phase: 2° maximum
K Factor: 0.5%
Signal-to-Noise Ratio: 70 dB minimum
Crosstalk (Input to Input Isolation): –50 dB typical
Feedthrough (Input to Output Isolation): 45 dB typical
Gain: Unity ± 2% (into 75 Ohm termination)
Tilt: 1% typical
Transient Protection (VIM Cards): 350 W Peak Pulse Power (tp = 8/20 µs)
Temperature ; 
Operating: 4°C to 50°C (40°F to 122°F)
Storage: –40°C to 60°C (–40°F to 140°F)
Altitude: 4500 m (15,000 ft)
Humidity: 0% to 95% relative, non-condensing
Vibration: 3 g swept sine wave, 15 Hz to 2000 Hz
Shock: 50 g, 11 ms, 1/2 sine wave

• Includes equipment rack, LTC 8610/01 microprocessor module, and LTC 8805 Series power supply.    

Power ;
Model No.: Rated Voltage , Voltage Range , Nominal Power1
LTC 8601/60: 120 VAC, 50/60 Hz , 100 to 140 , 200 W
LTC 8601/50: 220–240 VAC, 50/60 Hz , 198 to 264 , 200 W

• 1. Power at rated voltage fully loaded.    

Connectors ;
Video Inputs 1 to 96: One (1) sync input, and 16 monitor outputs, BNC
Video Connections 97 to 128: Two (2), 34-pin ribbon connectors used in conjunction with the LTC 8808/00 video interconnect panel
Looping Video Connections 1-128: Eight (8), 34-pin ribbon connectors used in conjunction with the LTC 8808/00 video interconnect panel

Connectors ;
CONSOLE: 9-pin D-type RS-232 port for external PC or control interface (Default = 19.2 k baud)
ALARM: 9-pin D-type RS-232 port for Allegiant alarm accessory unit (Default = 19.2 k baud)
PRINTER: 9-pin D-type RS-232 port for system logging printer (Default = 19.2 k baud)
SDA: 9-pin D-type, TTL level, hi-speed control data output (Bi-Phase) for interface to Allegiant series signal distribution units (Data clock rate = 31.25 kHz)
COM PORT 1: 9-pin D-type RS-485 port for external Allegiant accessory use
COM PORT 2: 9-pin D-type RS-485 port for external Allegiant accessory use
KEYBOARDS: Eight (8), 6-pin RS-485 ports for Allegiant keyboard use
Size (W x D x H): EIA 48 cm (19 in.) rack, 483 x 420 x 267 mm (19 x 16.5 x 10.5 in.)
Weight: 11.1 kg (24.5 lb)
Construction/Finish: Top and bottom: steel front and sides back: aluminum
Finish: Charcoal
Size (D x H): 300 x 250 mm (11.8 x 9.8 in.)
Weight: 0.5 kg (1.1 lb)

• (LTC 8805/60–120 VAC, LTC 8805/50–220-240 VAC)    

Size (W x D x H): 67 x 360 x 247 mm (2.63 x 14.2 x 9.7 in.)
Weight: 5.2 kg (11.5 lb)
Indicators: One power On/Off, ten fuse alert, and one external sync LED

• Use up to eight (8) per equipment bay.    

Camera Inputs: 16
Size (D x H): 300 x 250 mm (11.8 x 9.8 in.)
Weight: 0.41 kg (0.9 lb)

• Use up to (4) four per equipment bay.    

Monitor Outputs: 4
Size (D x H): 300 x 250 mm (11.8 x 9.8 in.)
Weight: 0.41 kg (0.9 lb)

• The LTC 8808/00 assembly contains an interconnect panel is used to convert 32 BNC connectors into two 16-channel ribbon cable connectors. The two 16-conductor ribbon cables (LTC 8809/00), designed especially for use with video signals, are used to interconnect the video between the panel and the LTC 8600 Series system. One LTC 8808/00 assembly is included at time of shipment and is required for system video inputs 97 to 128. In addition to being used for video inputs 97 to 128, the LTC 8808/00 assembly can also be ordered as an option to provide looping capability. One LTC 8808/00 (includes panel and two, ribbon cables) is required for each group of 32 cameras.    

Finish: Charcoal
Size (W x D x H): EIA 48 cm (19 in.) rack, 483 x 42 x 44 mm (19 x 1.65 x 1.75 in.)
Weight ;
Panel: 0.54 kg (1.2 lb)
Ribbon Cables (2): 0.3 kg (0.7 lb)

• The LTC 8600 Series accessory products provide many optional features to the base Allegiant switching systems. Accessory products include keyboards, keyboard extension kits, receiver/driver units, switcher/followers, code merger units, Allegiant Bilinx Data Interface unit, video ribbon cables, and keyboard expansion units. All accessory products are designed to be installer-friendly and compatible throughout the Allegiant series systems. See the Allegiant Accessories datasheet.