- 4096 Camera by 512 monitor switching
- Modular construction
- Powerful alarm handling capabilities
- SalvoSwitching and SatelliteSwitch capability
- Includes Windows-based configuration software
- Two-digit site plus 4-digit camera ID mode
- Includes system controller PC and LCD monitor
- Preloaded programming and diagnostic software
- Dual/redundant CPU/power supply
BOSCH - LTC 8900 SERİES ALLEGİANT MATRİX/CONTROL SYSTEMS - MODULAR
Capacities ;
Video Inputs
Standard: 4096
Satellite Configuration: 6144
Video Outputs: 512
Keyboards: 120
Alarm Inputs: 1024
Receiver/Drivers ;
Standard: 4096
Satellite Configuration: 6144
Input Voltage Level: 0.5 Vp-p to 2 Vp-p (composite negative sync)
Gain: Unity ± 2% (75 Ohm terminated)
Pulse/Bar Ratios1: Min. , Nom. , Max.
94%: 98% , 106%
2T Pulse K Factor1: Min. , Nom. , Max.
0.2%: 2.5%
Bar Amplitude (IRE) 1: Min. , Nom. , Max.
96: 98 , 104
Sync Amplitude (% Bar) 1: Min. , Nom. , Max.
36%: 39% , 44%
Field Time Waveform Distortion1: 2% maximum
Line Time Waveform Distortion1: 1% maximum
Short Time Waveform Distortion1: 2% maximum
Long Time Waveform Distortion1: 0.8% maximum
Video Bandwidth (-3 dB): 17 MHz
Frequency Response: ± 0.5 dB to 11 MHz
Signal-to-Noise-Ratio1: 70 dB at 3.58 MHz unified unweighted minimum
Crosstalk (at 3.58 MHz): Typical: –65 dB, Adjacent channel: –45 dB (typical)
Hum: 60 dB below the composite 1 Vp-p video signal from 60 Hz to 6 MHz
Differential Gain1: Min. , Nom. , Max.
0.6%: 2%
Differential Phase1: Min. , Nom. , Max.
0.6°: 1.3°
Chrominance Luminance Gain: Min. , Nom. , Max.
94%: 100% , 109%
Chrominance Luminance Delay1: Min. , Nom. , Max.
–33 ns: +3 ns , +33 ns
Luminance Nonlinearity1: Min. , Nom. , Max.
0.3%: 4%
Switching: Crosspoint matrix
DC Output: 0 V
Transient Protection (VIM Cards): 350 W Peak Pulse Power (tp = 8/20 µs
1 Meets EIA/TIA - 250C Medium Haul Standard for 1024 cameras x 64 monitors.
Temperature ;
Operating: 4°C to 50°C (40°F to 122°F)
Storage: –40°C to 60°C (–40°F to 140°F)
Altitude: 4500 m (15,000 ft)
Humidity: 0 to 95 % relative, non-condensing
Vibration: 3 g swept sine wave, 15 Hz to 2000 Hz
Shock: 50 g, 11 m/s, ½ sine wave- The LTC 8904/60 and LTC 8904/50 include the equipment rack, LTC 8910/01 microprocessor module, LTC 8905/90 power supply, and LTC 8917/00 relay module.
Model No.: Rated Voltage , Voltage Range , Nominal Power2
LTC 8904/60: 120 VAC, 50/60 Hz , 100 to 140 , 30 W
LTC 8904/50: 220–240 VAC, 50/60 Hz , 198 to 264 , 30 W
2 Power at rated voltage fully loaded.
Connectors ;
Controller Port: 9-pin D-type RS-232 port for an external PC or computing device (default = 115,200 baud)
Console: 9-pin D-type RS-232 port for an external computer or a computing device (default = 19,200 baud)
Alarm: 9-pin D-type RS-232 port for an Allegiant alarm accessory unit (default = 19,200 baud)
Bi-Phase: 9-pin D-type TTL level, high-speed control data output (BiPhase) for interface to an Allegiant series signal distribution units (data clock rate = 31.25 kHz)
COM Ports: Two 9-pin D-type RS-485 ports for an external Allegiant accessory use
Keyboards: Eight (8), 6-pin RS-485 ports for an Allegiant keyboard use (default = 9600 baud)
LAN: RJ-45 high-speed LAN port for interface to LTC 8902 Series and LTC 8903 Series bays via LTC 8946 Series LAN switches
Equipment Rack ;
Dimensions(W x D x H): EIA 48 cm (19 in.) rack, 440 x 394 x 86 mm (17.3 x 15.5 x 3.4 in.)
Weight: 7.2 kg (15.85 lb)
Construction: Metal case with plastic panel
Finish: Charcoal
Dimensions(D x H): 300 x 250 mm (11.8 x 9.8 in.)
Weight: 0.5 kg (1.1 lb)
Dimensions(D x H): 300 x 250 mm (11.8 x 9.8 in.)
Front Panel Indicators: Power, CPU activity- The LTC 8901/60 and LTC 8901/50 include the equipment rack, dual LTC 8910/01 microprocessor modules, dual LTC 8905/90 power supplies, and one LTC 8917/00 relay module.
Model No.: Rated Voltage , Voltage Range , Nominal Power3
LTC 8901/60: 120 VAC, 50/60 Hz , 100 to 140 , 30 W
LTC 8901/50: 220–240 VAC, 50/60 Hz , 198 to 264 , 30 W
3 Power at rated voltage fully loaded.
Connectors ;
Controller Ports: Two (2), RS-232 ports for an LTC 8943 PC controller interface (default = 115,200 baud)
Console: RS-232 port for an external computer or a computing device (default = 19,200 baud)
Alarm: RS-232 port for an Allegiant alarm accessory unit (default = 19,200 baud)
Switch Ctrl: Digital interface port for the LTC 8943 PC controller
Bi-Phase: TTL level, hi-speed control data output (Bi-Phase) for interface to an Allegiant series signal distribution units (data clock rate = 31.25 kHz)
COM Ports: Two (2), RS-485 port for an external Allegiant accessory use
Keyboards: Eight (8), 6-pin RS-485 ports for an Allegiant keyboard use (default = 9600 baud)
LAN: Two RJ-45 high-speed LAN ports for interface to LTC 8902 Series and LTC 8903 Series bays via LTC 8944 Series and LTC 8945 Series LAN Switches
Equipment Rack ;
Dimensions(W x D x H): EIA 48 cm (19 in.) rack, 440 x 394 x 86 mm (17.3 x 15.5 x 3.4 in.)
Weight: 8 kg (17.6 lb)
Construction: Metal case with plastic panel
Finish: Charcoal
Dimensions(D x H): 300 x 250 mm (11.8 x 9.8 in.)Weight: 0.5 kg (1.1 lb)
Dimensions(D x H): 300 x 250 mm (11.8 x 9.8 in.)
Front Panel Indicators ;- LTC 8901Primary power Primary faultBack-up powerBack-up faultPrimary CPU in-useController activityBack-up CPU in-useAuto-select modePrimary CPU activityFault buzzerBack-up CPU activityLTC 8904PowerCPU Activity
Rear Panel Indicators ;
- Relay outputs4Primary CPU faultBack-up power supply failureBack-up CPU fault Any failurePrimary power supply failure
4 Relay Contacts: 24 VAC, 40 V peak, 1 A.
- The LTC 8902/60 and LTC 8902/50 include the equipment rack, LTC 8916/01 data receiver module, and LTC 8906 Series power supply.
Model No.: Rated Voltage , Voltage Range , Nominal Power5
LTC 8902/60: 120 VAC, 50/60 Hz , 100 to 140 , 160 W
LTC 8902/50: 220–240 VAC, 50/60 Hz , 198 to 264 , 160 W
5 Power at rated voltage fully loaded.
Connectors ;
Video Outputs: Four (4), 34-pin ribbon connectors used in conjunction with the LTC 8808/00 video interconnect panel
Video Bus Connections: Sixteen (16), 34-pin ribbon connectors interconnect with LTC 8903 Series Camera Input bays using LTC 8809/00 ribbon cables
Console: Port reserved for future use
COM 1: Port reserved for future use
COM 2: Port reserved for future use
EXT Sync: BNC input used to synchronize the unit to an external sync signal. Accepts composite video, composite sync, or the V Sync output provided from another LTC 8900 Series matrix bay
V Sync: BNC connector provides an output signal to synchronize an additional LTC 8900 Series matrix bay via its EXT Sync input
External Data Interface: Two (2), RJ-45 high-speed LAN ports for interface to the LTC 8901 Main CPU bay via system LAN Switches. (Connected in parallel; one is used, one is reserved for future use)
Equipment Rack ;
Dimensions(W x D x H): EIA 48 cm (19 in.) rack, 483 x 420 x 267 mm (19 x 16.5 x 10.5 in.)
Weight: 11.1 kg (24.5 lb)
Construction: Metal cabinet
Finish: Charcoal
Dimensions(W x D x H): EIA 48 cm (19 in.) rack, 483 x 420 x 267 mm (19 x 16.5 x 10.5 in.)
Weight: 0.5 kg (1.1 lb)
Dimensions(W x D x H): 67 x 360 x 247 mm (2.63 x 14.2 x 9.7 in.)
Weight: 5.2 kg (11.5 lb)
Indicators: Power On/Off and fuse alert LEDs- The LTC 8903/60 and LTC 8903/50 include the equipment rack, LTC 8918/01 data receiver module, and LTC 8805 Series power supply.
Model No.: Rated Voltage , Voltage Range , Nominal Power6
LTC 8903/60: 120 VAC, 50/60 Hz , 100 to 140 , 85 W
LTC 8903/50: 220–240 VAC, 50/60 Hz , 198 to 264 , 85 W- 6 Power at rated voltage fully loaded.
Connectors ;
Video Inputs: Sixteen (16), 34-pin ribbon connectors used in conjunction with the LTC 8808/00 video interconnect panel
Looping Video Input Connections: Sixteen (16), 34-pin ribbon connectors used with LTC 8809/00 ribbon cables (supplied as required to loop to additional LTC 8903 Series bays)
Video Bus Connections: Four (4), 34-pin ribbon connectors interconnect with LTC 8903 Series camera input bays using LTC 8809/00 ribbon cables
Console: Port reserved for future use
COM 1: Port reserved for future use
COM 2: Port reserved for future use
EXT SYNC: BNC input used to synchronize unit to external sync signal; accepts composite video, composite sync, or the V Sync output provided from another LTC 8900 Series matrix bayV SYNC: BNC connector provides output signal to synchronize an additional LTC 8900 Series matrix bay via its EXT Sync input
External Data Interface: Two (2), RJ-45 high-speed LAN ports for interface to LTC 8901 main CPU bay via system LAN Switches (Connected in parallel; one is used, one is reserved for future use)
Equipment Rack ;
Dimensions(W x D x H): EIA 48 cm (19 in.) rack, 483 x 420 x 267 mm (19 x 16.5 x 10.5 in.)
Weight: 11.1 kg (24.5 lb)
Construction: Metal cabinet
Finish: Charcoal
Dimensions(W x D x H): EIA 48 cm (19 in.) rack, 483 x 420 x 267 mm (19 x 16.5 x 10.5 in.)
Weight: 0.5 kg (1.1 lb)
Size(W x D x H): 67 x 360 x 247 mm (2.63 x 14.2 x 9.7 in.)
Weight: 5.2 kg (11.5 lb)
Indicators: Power On/Off and fuse alert LEDs- Use up to sixteen per LTC 8903 Series camera input bays.
Camera Inputs: 32
Size(D x H): 300 x 250 mm (11.8 x 9.8 in.)
Weight: 0.41 kg (0.9 lb)- Use up to eight per LTC 8902 Series monitor output bays.
Monitor Outputs: 8
Dimensions(D x H): 300 x 250 mm (11.8 x 9.8 in.)
Weight: 0.41 kg (0.9 lb)- (Redundant System Configurations Only)
- Includes LTC 8943/94 PC, LTC 8944/93 Primary LAN Switch and LTC 8945/93 Backup LAN Switch
LTC 8943/94 PC: Rack-mount industrial-grade Pentium PC, 512 MB RAM (minimum), 8 GB solid state hard drive (minimum), CD-/DVD burner, floppy drive, keyboard, mouse, keyboard/mouse rack-mount shelf, and Windows XP Professional; 120/230 VAC, 50/60 Hz
LTC 8059/00: Allegiant Master Control software (installed on PC)
Monitor(UML-191-90): 48.3 cm (19 in.) LCD panel 120/230 VAC, 50/60 Hz
Monitor Rack(UMM-LCDUB-RM): Racked Height: 37.4 cm (14.7 in.) Racked Width: 48.3 cm (19.0 in.)
LTC 8944/93 Primary LAN Switch: 24-port 10/100Base-T Ethernet Switch with SNMP Module, programmed with primary IP Address; 120/220 VAC, 50/60 Hz
LTC 8945/93 Back-Up LAN Switch: 24-port 10/100Base-T Ethernet Switch with SNMP Module, programmed with back-up IP Address; 120/220 VAC, 50/60 Hz- 24-port 10/100BaseT Ethernet Switch, no SNMP module; 120/220 VAC, 50/60 Hz
- The LTC 8808/00 assembly contains an interconnect panel which is used to convert 32 BNC connectors into two 16-channel ribbon cable connectors. The two (2) coaxial ribbon cables (LTC 8809/00), designed especially for use with video signals, and are then used to interconnect the video between the panel and the LTC 8900 system. Use of the LTC 8808/00 assemblies are required for all external video input and output connections. In addition to being used for video inputs and monitor outputs, the LTC 8808/00 assembly is also used to provide looping capability. One (1) LTC 8808/00 (includes panel and two ribbon cables) is required for each group of 32 system cameras or 32 monitors.
Dimensions (W x D x H): EIA 48 cm (19 in.) rack, 483 x 42 x 44 mm (19 x 1.65 x 1.75 in.)
Weight ;
Panel: 0.54 kg (1.2 lb)
Ribbon Cables: Two (2), 0.3 kg (0.7 lb)
Construction: Metal
Finish: Charcoal- The LTC 8900 Series accessory products provide many optional features to the base Allegiant switching systems. Accessory products include keyboard extension kits, Allegiant Bilinx Data Interface unit, receiver/driver units, switcher/followers, code merger units, video ribbon cables, and keyboard expansion units. All accessory products are designed to be installer-friendly and compatible throughout the Allegiant series systems. See the Allegiant Accessories datasheet.