- Exceptional strength and ruggedness for any outdoor application such as traffic monitoring (bridges, tunnels, or highways), perimeter protection, and city surveillance
- Starlight camera technology with excellent low-light sensitivity (color = 0.0077 lx)
- Extended Dynamic Range mode (120 dB) to see details in bright and dark areas simultaneously
- Optional, field-installable combo illuminator (IR/White light) provides detection of objects up to 300 m (984 ft) away
BOSCH - MIC IP starlight 7000 HD (1080p)
Imager: 1/2.8-type Exmor R CMOS sensor
Effective Picture Elements (Pixels): 1945 x 1097 (2.13 MP)
Lens: 30x Zoom4.3 mm to 129 mmF1.6 to F4.7
Field of View (FOV): 2.3° to 65°
Focus: Automatic with manual override
Iris: Automatic with manual override
Digital Zoom: 12x
Video performance - Sensitivity ;
(3100K, reflectivity 89%, 1/30, F1.6, 30 IRE)
Color: 0.0077 lx
Mono: 0.0008 lx
Gain control: AGC, Fixed
Aperture Correction: Horizontal and vertical
Electronic Shutter Speed (AES): 1/1 sec to 1/10000 sec (22 steps)
Signal-to-Noise Ratio (SNR): >55 dB
Day/Night switch: Automatic IR cut filter
Backlight compensation (BLC): On, Off
White balance: 2000 K to 10,000 K ATW, AWB Hold, Extended ATW, Manual, Sodium Lamp Auto, Sodium Lamp
Day/Night: Monochrome, Color, Auto
Defog mode feature: Improves visibility when viewing foggy or other low-contrast scenes.
High dynamic range (HDR)
25/30 fps: 120 dB
50/60 fps: 90 dB
Drive Unit: Brushless, integral pan/tilt motor drive
Pan Range: 360° continuous rotation
Tilt Angle: Without illuminators (camera upright): 290°Without illuminators (camera inverted): 250°With illuminators: 186.6°
Tilt Range: Upright unit: -55° - +90°Canted unit: -90° - +90°Variable Pan Speed: 0.8°/second - 120°/second
Variable Tilt Speed: 0.8°/second - 90°/second
Intelligent Tracking Speed: 0.8°/second - 120°/second
Pre-position Speed: 120°/second
Preset Accuracy: 0.17° (typical) ;
Proportional Pan / Tilt to Zoom: Yes
Zoom Movement Speed: <5 seconds (optical Wide to optical TELE)
<7.5 seconds: (optical Wide to digital TELE)
Audible Noise: <65 dB
Input Voltage: 21-30 VAC, 50/60 Hzand/orEthernet High PoE cable connection (56 VDC)
Power Consumption: Without illuminator: 40 W maximumWith illuminator: 70 W maximum
Camera Setup/Control: Via Internet Explorer web browser version 7.0 or later, Bosch Configuration Manager, Bosch Video Management System (BVMS), Bosch Video Client (BVC), or support for third party software
Software Update: Network firmware upload
Serial protocols: Bosch OSRD, Pelco P/D, and Forward Vision (Note: For Pelco and Forward Vision protocols, a separate license (MVS-FCOM-PRCL) is required.)
Standards / Video compression: H.264 (ISO/IEC 14496‑10), M‑JPEG, JPEG
Streaming: Four (4) streams with individually configurable frame rate and resolution: Two (2) independently configurable H.264 recording streams Two (2) non-recording streams (profiles)
When the option in field “Property” for Stream 1 is: The available options in field “Property” for Stream 2 are:
H.264 MP SD: - H.264 MP SD
H.264 MP 720p fixed: - H.264 MP SD - H.264 MP 720p fixed - H.264 MP 400x720 upright (cropped) - H.264 MP D1 4:3 (cropped) - H.264 MP 1280x960 (cropped) - H.264 MP 640x480
H.264 MP 1080p fixed: - Copy Stream 1 - H.264 MP SD - H.264 MP 720p8/10 fixed - H.264 MP 1080p4/5 fixed - H.264 MP 400x720 upright (cropped) - H.264 MP D1 4:3 (cropped) - H.264 MP 640x480
H.264 MP 720p50/60 fixed: - Copy Stream 1 - H.264 MP SD - H.264 MP 720p6/7 fixed - H.264 MP 400x720 upright (cropped) - H.264 MP D1 4:3 (cropped) - H.264 MP 640x480
Non-recording profiles: Two (2) streams, I-frame only Options are:- HD Image Optimized- HD Balanced- HD Bit Rate Optimized- SD Image Optimized- SD Balanced- SD Bit Rate Optimized- DSL Optimized- 3G Optimized
Resolution (H x V) ;
1080p HD: 1920 x 1080
720p HD: 1280 x 720
432p SD: 768 x 432
288p SD: 512 x 288144p SD: 256 x 144
Protocols: IPv4, IPv6, UDP, TCP, HTTP, HTTPS, RTP/RTCP, IGMP V2/V3, ICMP, ICMPv6, RTSP, FTP, Telnet, ARP, DHCP, APIPA (Auto-IP, link local address), NTP (SNTP), 802.1x, DNS, DNSv6, DDNS (Dyn.com, selfHOST.de, no-ip.com), SMTP, iSCSI, UPnP (SSDP), DiffServ (QoS), LLDP, SOAP, Dropbox™, CHAP, digest authentication
Ethernet: 10BASE-T/100BASE-TX, auto-sensing, half/full duplex
Encryption: TLS 1.0, SSL, DES, 3DES, AES
Ethernet connector: RJ45
Connectivity: ONVIF Profile S, Auto-MDIX
GOP Structure: IP, IBP, IBBP
Data Rate: 9.6 kbps to 6 Mbps
Overall IP Delay: 120 ms (60 fps mode)
Sectors / Title: 16 independent sectors with 20 characters per title
Privacy Masks: 24 individually configurable privacy masks
Virtual Masks: 24 individually configurable masks to hide parts of the scene (background motion such as moving trees, pulsating lights, busy roads, etc.) which should not be considered for flow analysis to trigger Intelligent Tracking.
Prepositions: 256, each with 20 characters per title
Guard Tours: Two (2) types of tours: Recorded tours - two (2), maximum total duration 30 minutes (depending on amount of commands sent during recording) Preset tour - one (1), consisting of up to 256 scenes consecutively, and (1) customized up to 64 scenes
Supported Languages: English, Czech*, Dutch, French, German, Italian, Polish, Portuguese, Russian*, Spanish, Japanese, Chinese * Available with separate language upload
Power, Network: Without illuminator: RJ45 100BASE-TX Ethernet High PoE Midspan - 60 W (NPD-6001A) or 95 W (NPD-9501A) With illuminator: 95 W High PoE Midspan (NPD-9501A)*
Power, Camera: 24 VAC (power supply)
Video and Control: RJ45 100BASE-TX Ethernet RS-485 Simplex 9600 baud (dedicated for MIC-ALM-WAS-24)
Alarm/Washer: 3-wire RS-485
* Must purchase either NPD-9501A or VIDEOJET connect 7000 (VJC-7000-90) in order to use the High PoE solution.
Ingress Protection Rating/Standard: IP68 / NEMA 6P (dust and immersion) when installed on a MIC-DCA or on a MIC wall mount IP67 (moisture and dust) rating on connectors in the base of the camera when using the IP67 Connector Kit (MIC-IP67-5PK), which is also required when using non-Bosch mounts
External Mechanical Impact (IK Code or Impact rating): IK10 (excluding glass window)
Operating Temperature: -40 °C to +60 °C (-40 °F to +140 °F)
NEMA TS 2-2003 (R2008), para 2.1.5.1 using fig. 2.1 test profile: -34 ºC to +74 ºC (-30 ºF to +165 ºF)
Cold Start-up Temperature: -40 °C (-40 °F)(Requires 60-minute warm-up prior to PTZ operations.)
Storage Temperature: -60 °C to +70 °C (-76 °F to +158 °F)
Humidity: 0-100%
Standard Finish: Corrosion protection surface treatment with powder coat paint, sand finish