top of page
BOSCH - MIC SERİES 440 EXPLOSİON-PROTECTED CAMERA
  • CSA, ATEX (Directive 2014/34/EU), IECEx (SIR 11.0023X), and CNEX certified
  • Industry-leading IP68 rated housing
  • Integrated wiper

BOSCH - MIC SERİES 440 EXPLOSİON-PROTECTED CAMERA

  • Image sensor: 1/4‑inch EXview CCD
    Picture elements: PAL: Approximately 440,000; 752(H) x 582(V)NTSC: Approximately 380,000;768 (H) x 494 (V)
    Horizontal resolution: 470 TVL NTSC/PAL typical
    Filter: Automatic mechanical IR cut filter
    Focus system: Auto or manual
    Iris: Auto or manual with slow shutter integration modes
    Synchronization: Internal / External (V‑Lock)
    Recommended illumination: 100 to 100,000 lx
    Signal-to-Noise ratio (SNR): 50 dB or more
    Back Light Compensation (BLC): On/Off
    White balance: Automatic
    Automatic Gain Control (AGC): -3 to -28 dB, 2 dB steps
    Aperture control: 16 Steps
    Lens: F=3.4 mm (WIDE) to 122.4 mm (TELE), F1.6 to F4.5
    Zoom: 36x optical (12x digital)
    Angle of view: 57.8º (WIDE end) to 1.7º (TELE end)
    Minimum illumination: 1.4 lux (1/60 s NTSC, 1/50 s PAL, typical, 50 IRE)0.1 lux (1/4 s NTSC, 1/3 s PAL, typical, 50 IRE)ICR-ON mode: 0.01 lux (1/4 s NTSC, 1/3 s PAL)
    Shutter speed: 1/4 to 1/10,000s (20 steps) NTSC, 1/3 to 1/10,000s (20  steps) PAL
    Auto flip: Yes
    Manual flip: Yes
    Presets: 64 telemetry presets utilizing resolver technology
    Preset tours: 6 tours each with up to 32 presets
    Sector titles: Yes (64 sectors) 20 characters per title
    Preset titles: 20 character caption for each of the 64 presets
    Home position: Yes (preset 1 or tour)
    Communication: RS485 / RS422

    Control protocol: Bosch and Pelco protocol variants available. Bi-phase control requires Biphase to RS485 converter (MIC-BP4) to be installed in the power supply (available separately).
    Video: Co-axial via composite cable
    Telemetry: Twisted pair. Simplex, half and full duplex operation via composite cable
    Power: Via composite cable
    Alarm inputs: 1 tamper input (additional inputs possible with optional alarm card in PSU)
    Alarm communication: Tamper switch (ground connection)
    Drive unit: Integral pan/tilt motor drive
    Pan angle: 360° continuous rotation
    Pan speed: Up to 90° per second (variable)
    Tilt angle: 240°
    Tilt speed: 0.2° to 90° per second (variable)
    Speed control: Closed‑loop electronics
    Preset accuracy: Better than 0.08°
    Proportional: Pan/Tilt to zoom    Yes
    Input voltage: 18VAC
    Power consumption: 25.2 W max
    Operating temperature: -20 °C to +60 °C (-4 °F to 140 °F)
    Weatherproofing: IP68 (1m submersion for 24 hours maximum)
    Dimensions (W x H x D): 286 x 523.6 x 189 mm (11.26 x 20.61 x 7.44 in.)(including deep conduit adapter)
    Weight: 15.5 Kg (34.17 lb)(including 4‑in. (101.6 mm) pitch circle diameter (PCD) base and supplied deep conduit adapter)
    Viewing window: Tempered flat glass
    Construction material: Machined aluminum
    Standard Colors: Black (RAL 9005)
    Standard Finish: Iridite surface treatment with powder coat paint
    Window wiper: Standard

bottom of page