BOSCH - MIC SERİES 612 THERMAL CAMERA

Imager: ¼ in.-type EXview HAD CCD (progressive scan)
Resolution/EffectivePicture Elements: PAL: Approximately 440,000; 752(H) x 582(V)NTSC: Approximately 380,000; 768(H) x 494(V)
Lens: 36x Zoom (3.4 mm to 122.4 mm)F1.6 to F4.5
Zoom Movement Speed: 4.0 seconds (optical Wide to optical TELE)6.2 seconds (optical wide to digital TELE)
Focus: Automatic with manual override
Iris: Automatic with manual override
Field of View (FOV): 1.7º to 57.8º
Video Output: 1.0 Vp-p, 75 Ohm
Gain Control: Auto/Manual/Max.(-3 dB to +28 dB, 2 dB steps)
Aperture Correction: Horizontal and vertical
Digital Zoom: 12x
Horizontal Resolution: 550 TVL (NTSC, PAL) typical
Sensitivity ¹: 30 IRE , 50 IRE
Day Mode ;
SensUp Off: 0.66 lux , 1.4 lux
SensUp On(NTSC: 1/4s, 15X; PAL 1/3s, 16.7X): 0.04 lux , 0.1 lux
Night Mode ;
SensUp Off: 0.104 lux , 0.209 lux
SensUp On(NTSC: 1/4s, 15X; PAL 1/3s, 16.7X): 0.0052 lux , 0.0103 lux
Filter: Automatic IR cut filter
Electronic Shutter Speed: 1/1 to 1/10,000 seconds (22 steps)
Wide Dynamic Range (WDR): 92 dB (50 dB with WDR Off)
Signal-to-Noise Ratio (SNR): >50 dB
White Balance: 2000 K to 10,000 K
Imager: Focal Plane Array (FPA), un-cooled Vanadium Oxide microbolometer with user-selectable on-screen temperature display (spot meter) and alarm- 7.5 Hz NTSC, 8.3 Hz PAL- 30 Hz NTSC, 25 Hz PAL; US export license may be required. Refer to the section “Installation/configuration notes” for more details.
Resolution/Effective Picture Elements: PAL: 320 x 256NTSC: 320 x 240
Lens: 35 mm (F1.2)
Field of View (FOV): 13° x 10°
Spectral Response: 7.5 to 13.5 μm
Thermal Sensitivity (NEDT): <50mk f/1.0
Digital Zoom: 2x, 4x
Focus: Factory-set at infinity focus
Performance Range: Human 1.8 x 0.5 m(5.9  x 1.6 ft) , Object 2.3 x 2.3 m(7.5 x 7.5 ft)
Detection: 800 m (2625 ft) , 2250 m (7382 ft)
Recognition: 200 m (656 ft) , 590 m (1936 ft)
Identification: 105 m (344 ft) , 290 m (951 ft)
User-selectableAGC Modes: Outdoor (default mode)IndoorLow Contrast
User-selectableThermal Modes (Color Options): White Hot (default mode)Black HotFusionRainbowGlobowIronbow 1Ironbow 2SepiaColor 1Color 2IceFireRain
Imager: Focal Plane Array (FPA), un-cooled Vanadium Oxide microbolometer - 7.5 Hz NTSC, 8.3 Hz PAL- 30 Hz NTSC, 25 Hz PAL; US export license may be required. Refer to the section “Installation/configuration notes” for more details.
Resolution/Effective Picture Elements: PAL: 640 x 512NTSC: 640 × 480
Lens: 50 mm (F1.2)
Field of View (FOV): 12.4° x 9.9°

Spectral Response: 7.5 to 13.5 μm
Thermal Sensitivity (NEDT): <50mk f/1.0
Digital Zoom: 2x, 4x
Focus: Factory-set at infinity focus
Performance Range: Human 1.8 x 0.5 m(5.9 x 1.6 ft) , Object 2.3 x 2.3 m(7.5 x 7.5 ft)
Detection: 1500 m (4921 ft) , 3900 m (12,795 ft)
Recognition: 380 m (1247 ft) , 1060 m (3478 ft)
Identification: 190 m (623 ft) , 540 m (1772 ft)
User-selectableAGC Modes: Outdoor (default mode)IndoorLow Contrast
User-selectableThermal Modes (Color Options): White Hot (default mode)Black HotFusionRainbowGlobowIronbow 1Ironbow 2SepiaColor 1Color 2IceFireRainRedHotGreenHot
Drive Unit: Brushless integral pan/tilt motor drive
Pan Range: 360° continuous rotation
Tilt Angle: 180°
Tilt Range: -58° to +90°

Variable Speed: Pan 0.2° to 72° per second (variable)Tilt: 0.2° to 90° per second (variable)
Pre-Position Speed: 120°/second
Preset Accuracy: ±0.30° (typical)
Proportional Pan / Tilt to Zoom: Yes
Audible Noise: <66dB
Input Voltage (dual source): 18 VAC, ±10%, 50/60 Hz
Power Consumption: Camera: 20.5 VAHeater: 8.5 VATotal: 29 VA
Input Current: Camera: 1.1 AHeater: 0.5 A
Sectors / Titling: 16 independent sectors, each with 20-character title
Privacy Masking: 24 individually-configurable privacy masks
Prepositions: 99, each with 20-character title
Guard Tours: Recorded Tours - two (2), total duration 15 minutes Preset Tours – one (1), consisting of up to 99 scenes, consecutively, and one (1) customized up to 99 scenes
Camera Setup / Control: RS-485, Bilinx (coax)
Communications Protocols: Bosch (Bilinx, OSRD), Pelco D/P Bosch OSRD requires use of converter device (MIC-BP3 or MIC-BP4, sold separately). (Bicom/Bilinx support on visible channel only.)
Washer Drive: Optional washer kit (MIC-WKT Kit used with the appropriate HAC-WAS washer pump)
Supported Languages: English, Czech*, Dutch, French, German, Italian, Portuguese, Russian*, Spanish* Available with separate language upload
Power: Via composite cable (sold separately)
Control Data: RS-485 (Twisted pair; Simplex, half and full duplex operation via composite cable) Biphase ±(Optional; requires MIC Biphase module with external power supply.)
Video: Dual coaxial via composite cable (sold separately) (Optical and optical/thermal cameras selectable.)
Alarm Inputs: One (1) tamper input (eight (8) additional inputs possible with optional alarm card)
Relay Outputs: Two (2) relay outputs and washer relay output only with optional alarm card
Alarm Communication: Tamper switch (ground connection)
Software: CTFID software allows direct connection to a USB-equipped PC via the MIC Series PSU over a full duplex to provide access to all camera functions and useful diagnostic tools.
Ingress Protection Rating/Standard: IP68/NEMA 6P
Operating Temperature(with heater): -40 °C to +60 °C (-40 °F to +140 °F)
Cold Start-up Temperature: -40 °C (-40 °F)(Requires 30-minute warm-up prior to PTZ operations.)
Storage Temperature: -40 °C to +70 °C (-40 °F to +158 °F)
Humidity: 0-100%
Wind Load(Estimated): 240 kph (150 mph) (sustained) Camera: 517 N (116 lbf) Wall Mount: 130 N (29 lbf) Effective Projected Area (EPA): Camera: 0.192 m² / 2.06 ft² Wall Mount: 0.0483 m² / 0.52 ft²
Vibration: IEC 60068-2-6, Test Fc: Vibration (operational), 10m/s² (1.0g)
Shock: IEC 60068-2-27, Test Ea: Shock, 30g
IK Code: IK10
Dimensions (W x H x D): 267 mm x 452 mm x 201 mm(10.5 in. x 17.8 in. X 7.9 in.)
Weight: 10.66 kg (23.50 lb)(including 4-in. pitch circle diameter (PCD) base)
Viewing Window: Tempered flat glass (optical) and germanium covering (thermal)
Construction Material: Machined aluminum
Standard Colors: Black (RAL9005), White (RAL9010);Grey (RAL9006, available in specific regions)
Standard Finis: Alodine 5200 surface treatment with powder coat paint, sand finish
Window Wiper: Standard, long-life silicone wiper
Heater: Standard
Sunshield: Optional; sold separately