top of page
BOSCH - MIC SERIES IP POWER SUPPLY
  • MIC power supply with IVA-enabled, integrated Bosch IP technology provides video and control over IP for MIC550, MIC550IR, and MIC612 cameras.
  • Easy-to-install, IP67-rated enclosure has high tolerance to vibration/shock for both indoor and outdoor installations.
  • Supports optional, user-installed Bosch Ethernet fiber optic.
  • NTCIP and ONVIF conformant encoder; integrates with transportation management devices and provides interoperability with other conformant systems.
  • Local storage on SD or SDHC card (32 GB maximum) for flexible recording options.

BOSCH - MIC SERIES IP POWER SUPPLY

  • MIC Camera models: MIC IP PSU (Non-IR models) , MIC IP PSU (IR models)
    MIC550: X
    MIC550 IR: X
    MIC612: X
    Model: Voltage / Power @ 50/60 Hz , Applicable Cameras
    Non-IR IP Power Supply Units    
    MIC-IP-PS-24    : Input: 24 VAC ± 10%Consumption: 2.0 A , MIC550, MIC612
    MIC-IP-PS-115: Input: 115 VAC ± 10%Consumption: 400 mA
    MIC-IP-PS-230: Input: 230 VAC ± 10%Consumption: 200 mA
    IR IP Power Supply Units    
    MIC-IPIR-PS-24    : Input: 24 VAC ± 10%Consumption: 3.3 A , MIC550IR
    MIC-IPIR-PS-115: Input: 115 VAC ± 10%Consumption: 750 mA
    MIC-IPIR-PS-230: Input: 230 VAC± 10% Consumption: 350 mA
    Dimensions (L x W x H): 330 mm x 250 mm x 90.75 mm(13 in. x 9.84 in. 3.57x in.)
    Form Factor (four screw holes): 11.19  mm (0.44 in.)
    Weight: Non-IR PSUs: 7.21 kg (15.9 lb)IR PSUs: 7.3 kg (16.1 lb)
    Material: Powder-coated cast aluminum, rated IP67
    Color: RAL 9010 (Pure White) with sand finish
    Optional add-ons(each sold separately): MIC-ALM (8-input alarm card)MIC-WKT (washer kit used with optional washer pump, purchased separately)MIC-WKT-IR (washer kit, with integrated four-input alarm terminal for IR models, used with optional washer pump, purchased separately)VG4‑SFPSCKT Fiber Optic Ethernet Media Converter Kit
    Alarm Inputs/Outputs ;
    IP Encoder Video Input(all models)    : Supports 1 video input- Recommended in order to use the switched video output for MIC thermal cameras.
    Non-IR, without expansion card: Supports 1 tamper input.
    Non-IR, with expansion card: Supports 8 inputs, 2 outputs.
    IR models: Supports 4 inputs.
    Operating Temperature: Non-IR models: -40 °C to +60 °C(-40 °F to +140 °F) IR models: -40 °C to +50 °C(-40 °F to +122 °F)

  • Storage Temperature: -40 °C to +65 °C (-40 °F to +149 °F)
    Cold Start: -30 °C(Requires 30-minute warm-up period after applying power before operation.)
    Camera Setup/Control: Via Internet Explorer Web browser version 7.0 or later or BVMS
    Software Update: Firmware upload
    Storage: One (1) SD card slot (for an SD or an SDHC card, user-supplied) with card capacity up to 32 GB
    Standards: H.264 (ISO/IEC 14496‑10), M‑JPEG, JPEG
    Streaming: A total of four (4) independent streams: Two (2) individually configurable H.264 streams at 4CIF/D1 resolution, One (1) H.264, I-frame only stream (suitable for recording) One (1) M‑JPEG stream at 4CIF/D1 resolution
    GOP Structure: IP, IBP, IBBP
    Data Rate: 9.6 kbps to 6 Mbps
    Overall IP Delay: 240 ms
    Resolution (Horizontal x Vertical, PAL/NTSC) ;
    4CIF/D1    : 704 x 576/480 (50/60 ips)Depending on picture content and movement
    CIF: 352 x 288/240 (50/60 ips4)
    Ethernet: 10-Base T/100 Base-TX, auto-sensing, half/full duplex, RJ45
    Protocols: RTP, Telnet, UDP, TCP, IP, HTTP, HTTPS, FTP, DHCP, IGMP V2/V3, ICMP, ARP, SMTP, SNTP, SNMP v3, RTSP, 802.1x, iSCSI, DynDNS, UPnP, IP v4/6, QoS, SSH, SSL
    Encryption: TLS 1.0, SSL, AES (license option)
    NTCIP Protocols ;
    CCTV Camera Control    : NTCIP 1205
    Application Layer: SNMP per NTCIP 1101:1996 & NTCIP 2301
    Transport/Network Layers: TCP/IP per NTCIP 2202:2001
    Sub-network Layer: PMPP (Point to Multi-Point Protocol) per NTCIP 2101:2001 & NTCIP 2102:2003
    Audio: 1 x 3.5mm stereo socket
    Standard: G.711, 8 kHz sampling rateL16, 16 kHz sampling rate
    Signal-to-Noise Ratio: >50 dB
    Audio Streaming: Full Duplex / Half Duplex
    Description: Fiber Optic Ethernet Media Converter kit (sold separately and user-installed inside the power supply enclosure)See the datasheet for the VG4‑SFPSCKT Fiber Optic Ethernet Media Converter Kit for technical specifications and other product details.
    Data Interface: Ethernet
    Data Rate: 10/100 MbpsIEEE 802.3 CompliantFull Duplex or Half Duplex Electrical PortFull Duplex Optical Port
    Compatible Receiver: CNFE2MC

bottom of page